Find Online Tutors for Homework Help

  • Ultimate axial bearing capacity of jacked pile in layered sand with using Driven Program 1 0

    The experiments are performed on three different water tables from dry level, cross-surface level and to the bottom of the 15m depth. Four different depths of steel and concrete piles are used for the experiment which is performed with the help of computing software Driven 1.2 providing all supposed calculation. Different depths of the surface are varying from medium sand to coarse sand with fine gravel. 8 tests were conducted for each of four piles making a series of tests manifesting the behaviors and measures of ultimate axial bearing capacity over the standards. A comparison of results manifests the consequences and derivations of the experiments as well as the supposed…

  • Mechanical and Aerospace Engineering Discovering of Planets Outside the Solar System

    With each star, there is a system of planets similar like our and this fact has given us hope that there might be another planet which we can call earth 2 one day. These groundbreaking discoveries one after the other proved that there is much to learn and the universe is way vast then we think.On the other hand, the population of the earth has reached a figure of over 6.9 billion The current population of the world is about 6.9 Billion (United States Census Bureau) with a growth rate of 1.1%. It is expected that this figure will rise to a value between 8 and 10 billion in 2040…

  • Novel Biocatalysts from Uncultivated Microbes

    This trait is also utilized in the production of industrial goods. These biocatalysts are becoming more popular and preferred over chemical catalysts in conversion reactions because they are environmentally friendly, more economical, and have cleaner action. In many industries, biocatalysts are replacing chemical catalysts for production and conversion processes. Among the industries that benefit from biocatalysts are the food industry, laundry detergent manufacture, pharmaceutical industry, and chemical production. Microorganisms like bacteria are the main source of these biocatalysts. Traditionally pure bacterial cultures are maintained, and allowed to express the biocatalysts or enzymes, which are then purified from the cultures. However, with the increased array and variability of industrial products, the…

  • The Innovation of Prosthetics

    That is, the innovation in the development of prosthetics is aimed at giving the amputee more control and feel over the device which makes him feel that it is as good as a natural body part. The whole evolution of prosthetics over the centuries is driven by the desire for improving the artificial devices’ anthropomorphism (Pitkin, 2009). Anthropomorphism can be best defined as the expressing of human motivations and feelings in non-human entities (Clark, 2011). In this case, it is to allow the prosthetic to serve as an equivalent to the natural body part doing all activities and functions that could have been performed with the natural body part. This…

  • Hyatt Regency Hotel Engineering Disaster of 1981

    In the past several decades, this science of engineering was broken down into many branches of study such as structural engineering, transportation engineering, hydraulic engineering, environmental engineering, geotechnical engineering, and so forth.Nevertheless, the most important task of civil engineering is the design and planning of various structures. For this reason, it is of great importance that the strengths and weaknesses of the structures, as well as the impact of the outside driving forces, should be carefully examined and analyzed to minimize the severity of the damage potential. It should also be never forgotten that even small details omitted or neglected might lead to extremely serious or even fatal accidents if…

  • Personal Protective Equipment &amp

    Control MeasuresControlling a hazard at the source is the best way to protect the employees. Substitution method involves replacing an ingredient/material used in the process or a machine with a less dangerous one. Engineering control involves building a barrier between the employees and the hazard through the enclosure, isolation, and ventilation (ILO, n.d.). Administrative control limits the amount of time an employee spends at a hazardous job by changing work schedules, providing longer rest period or shorter work shifts, or shifting hazardous work process where limited people would be exposed. This measure reduces exposure time and does not eliminate the hazard. If all control measures fail then the employer must…

  • Effect of Video on Academic and Psychological Achievement

    The understudies will be asked to finish an overview (Drummond,2014). The finished study will create a greater part of the essential parts to position every understudy in the right area of the 3 X 3 factorial outlines. The study will contain an assortment of inquiries identified with the theory of this study to focus on the examples. They are between the utilization designs/ recurrence of the utilization of video games with the kind of video diversion to the understudies achievement and psychological state. The overview will likewise educate with respect to the additional curricular exercises of the understudies since this kind of out of school association might likewise relate to…

  • Intellectual property in music industry

    The book was produced at a local copy shop onto folded sheets of 8.5 x 11 paper, with staples in the ‘fold’ holding the book together. The cookbooks are sold for $5.00 each, and given to anyone who donates more than $100 to the school Radiadata Systems, Inc. has developed lengthy software code for a computer program that uses mathematical modeling to analyze the stress placed on aircraft wings during atmospheric turbulence. In order to satisfy regulators and others about the efficacy of the software for deriving useful engineering results, the software source code has been made open to inspection. Based on their review, experts have agreed that the software…

  • How engineering has a negative impact on the natural environment

    Conferring to Balaban (2012), constructions are huge contributors to ecological deterioration. Moreover, it is quite clear that additional actions are required in order to make the building activities and the built environment ecological. Construction activities are among the major exploiters of both non-renewable and renewable natural resources. It depends profoundly on the natural environment to acquire raw materials that are used in these activities. These raw materials comprise of sand, timber, and aggregate for the construction process.According to Horvath (2004), the construction activities devours 40% of the globe’s sand, gravel, and raw stones and 25% of the virgin timber annually. Additionally, it devours 16% of water and 40% of the…

  • Software Management Metrics

    In this scenario, the majority of software development firms follows well-known industry standards such as ISO/IEC 15504 and CMMI. Additionally, in an attempt to improve the quality of developed products as well as their firm’s development potential and efficiency, a large number of approaches have been suggested in previous researches. Without a doubt, process assessment allows software development firms to understand their process capability and productivity, and taking into consideration the results of this assessment that firm can look forward to an improvement in its development processes by determining and understanding the strengths, weaknesses and risks associated with its processes and how to prevent them. Though, Software Engineering Institute’s CMMI…

  • IMPLEMENTATION OF NEW OR IMPROVED PRODUCT IN SERVICES INDUSTRY

    The customers’ interests on the safety as well as the return on the investments in the case of investment products or the risk coverage in the case of insurance products have to be thoroughly analysed and the implementation plan drawn in such a way that there will be a smooth transition in the case of an improvement over the existing product. In the case of new products adequate review process about the suitability of the product to the customer should be undertaken to ensure that the new product is accepted well by the customers and the implementation process is carried out in efficient and effective ways beneficial to the organization…

  • Describe the unique qualities that attract you to the specific undergraduate College or School (including preferred admission and dual degree programs) to which you are applying at the University of Michigan How would that curriculum support your interes

    Unique qualities of Michigan For better part of my childhood, I longed for a career whereby I would use my God-given skills and create something that will not only outlive me but also touch millions of people. I was always fascinated by the vision of the Wright Brothers, the intelligence of Albert Einstein and the almost perfect nature of Steve Jobs. All these great men influenced me to a great deal and it was no wonder that during my high school years I had settled for courses that would allow me to be admitted in one of the best engineering schools in the world.In addition, I have always admired entrepreneurs.…

  • Benefits of Various Software Engineering

    Describe THOUGHTFULLY how you learned to understand the differences and benefits of various software engineering lifecycle methodologies. Give two (2) examples from your personal experience of each learning process. (At least one paragraph) For example, we have a short time for software development. There is also a need to fulfill the deadline of deployment of the system. In this scenario, we know that only RAD (rapid application development methodology) is feasible. We know its benefits that how we can take the developed product on time by effectively tracking and managing system development lifecycle. The next example is about the condition of software development when we are going to develop a…

  • Automatic Control and Systems Engineering

    A block is a negligible component of Event-Condition-Action system that can state the behaviors represent in a process model. An algorithm is urbanized to detect blocks beginning a process meaning network and transform it into a hierarchical hierarchy model. The behaviors in every block type are modeled by means of ACTA formalism. This provides a hypothetical foundation from which ECA rules are recognized. The future ECA rule-based move toward shows that it is likely to execute the workflow by means of the active ability of database without users’ interference. The operation of the future methods is illustrated from side to side an instant process. FOR the previous several years, companies…

  • Real World Quadratic Functions

    Real World Quadratic Functions Introduction Quadratic functions have wide application in not only science and engineering but also in business. They find wide application in forecasting profits and losses in business and assisting in the determination of maximum and minimum values (Harshberger amp. Reynolds, 2013). A quadratic function is one that takes the form of f(x) = ax2 + bx + c. In this assignment, the daily profit recorded in the chain store would be determined by the number of clerks employed. The maximum profit would be determined from the profit function, P(x) = -25×2 + 300x, where:P – daily profit,x – number of clerksP = -25×2 + 300xThe x-intercepts…

  • Hot Flat and Crowded 2008 by Thomas L Friedman

    Friedman argues that most people are striving to live a middle-class type of life which allows them to afford a car, a house, a cell phone, and an air conditioner (31). With that many people using that much energy, the global supply for energy is not sustainable.The long term effects of these problems is that excessive energy use leads to climate change, robs the environment of its biodiversity, and widens the economic gap between the rich and the poor. Fundamentally, the world is becoming a harsher place to live in. By 2050, Friedman writes that it will be too late to reverse the harm caused by globalization, population, growth, and…

  • COLLABORATIVE OR PRINCIPLED NEGOTIATION

    It will also be very important not to ignore the fact that principled negotiation is thorough in terms of the factors that are considered and the presentation of the various requirements of the software stakeholders.This is a technique that has proved to be effective for a person who intends to separate the problem from the stakeholders. For example, clients might not have the same computing background as the suppliers or developers. This implies that there should be a way through which the requirements can take into consideration the difference in the nature of the differences of the stakeholders if in any case the project is to become a success.This is…

  • Information Engineering

    They can be regarding information theft, hacking, and identity break-in. for the solution of such a problem, we have to apply all aspects of the ethical framework for the solution of these problems. Then we gather the main facts regarding the problem then apply the previous solution for the handling of the problem. This also involves the assessment of the problem through your own skills of problem handling and management. Here we take advantage of one or more systematic analysis techniques. This helps us to draw ethical conclusions about the case regarding the IT ethical problem. This decision provides help for the solution to the ethical dilemma in the IT…

  • Resolving Issues Related to Cybercrime

    Cybercrimes have brought massive loss of funds and relevant authorities should formulate measures in order to address the situation.Consumers and businessmen have continued to face the problem of cybercrime as the legitimate uses of the internet have become more sophisticated and diversified. The crime that started in the late 1990s as a form of social engineering whereby criminals would steal passwords for consumers’ accounts with the intent of getting free connectivity has acquired significant growth and expansion into a profitable industry with the new forms of crime. These forms are monetary theft, identity theft, extortion, money laundering, and industrial espionage among other crimes (Ionescu, Mirea and Blajan p.375).The criminals who…

  • Uses of Nanotechnology in Medicine and Electronics

    The present research has identified that Understanding Nano is a website that talks about nanotechnology and its’ several applications. The website has several applications and one of it’s’ applications is in the medical field. The webpage on medicine talks about the use of nanotechnology in the medical field has revolutionized the methods of detecting the disease, treating damages to the human body and treating several diseases. One of the applications of nanotechnology in medicine involves the employment of nanoparticles in the delivery of heat, light drugs, and several other substances. This includes delivery of the substances to cancer cells. Quoting from the website ‘Nanotechnology enables the engineering of particles in…

  • Aspect of Human Genetic Engineering

    They say that genetic engineering could be used to find a cure for many incurable human diseases. As already said, genetic engineering is a relatively new science, it is very difficult to say as to what good or harm it could do to mankind (Bethell 38). Intervention in human genetics is something that is still associated with much fear and apprehension. The scientists who are directly associated with human genetic engineering do claim that by replacing some human genes, they can cure many human ailments. Irrespective of the confidence of a significant section of the scientific community in human genetic engineering, there still is not much data that could assure…

  • Cultural feasibility

    unit Introduction A cultural feasibility study is one that investigates the ethical, behavioral, scientific and social issues in the design and implementation of the project that is under development. The impacts tell project stakeholders to decide on what to do as the project progresses. The social cultural and ethical feasibility will look into the effects on the development designing and the continued way of operation of the proposed dental website system after installation. Cultural, Ethical or social feasibility on the proposed Dental appointment website The target group of people is not well known and will be included as the possible users of the system. The culture of the people in…

  • VW’s Resources

    VW’s Resources VW’s Resources Based on the resources and capabilities in Table 5.4 and Figure 5.7, one would liketo offer some strategy recommendations for VW (Table 5.4 Appraising VWs resources and capabilities, n.d.). Product development is considered an important aspect in the automobile industry. To be a market leader, it is essential that companies in this industry must be innovative. One observes however that one of the main weaknesses of VW is in the area of product development. A strategy that VW must adapt is to increase its budget allocation in research and development. They should improve on the features of its automobiles in terms of workmanship, design and technical…

  • Employment Interviews as a Selction Tool

    There are various types of interviews. Some interviews are conducted face to face between the employer and candidate while others may be conducted electronically or on phone. In terms of forms, interviews can be classified into three types, namely structured interviews, semi-structured interviews, and unstructured interviews. In the structured interviews, interviewer analyzes the skills of interview through a preformed set of questions. In the semi-structured interview, the interviewer may make the conversation apart from the questions as well. In fact, some questions are developed on the spot from the discussion. In unstructured interviews, there are no preformed questions. Quite often, very simple questions are used to assess the interest and…

  • Market entry strategies the Vianova case study

    However the opportunities are abundant and one should proceed cautiously with investment plans.Via Nova Engineering was established in the end of sixties with the objective manufacturing heavy engineering plants mainly concerned with the planning and supply of steel plants, shipyards, pipe mills and other metallurgical industries. Ever since it’s founding it has supplied, erected and managed various industrial plants with sophisticated technology all over the world. It has extensive Research and Development facilities aimed at improving technologies meant for use in heavy industries. Via Nova is also conscious of the environment protection and has supplied eco friendly systems for both safety as well as ensuring good health of the workersVia…

  • Advantages and disadvantges of the genetically modified crops

    For instance genetic engineers can extract a gene that causes drought resistance then insert it into another plant. The genetically modified plant now possesses the trait of resisting drought that is a trait of the first plant. This practice can be applied even for genes from non-plant organisms (Bijaya, 2013). A noteworthy point is that even though this practice can be applied on plants and animals, it is more commonly used on plants rather than animals.One advantage of GMOs is that they grow more rapidly than traditional organisms. Conventionally, traditional crops can only be grown during the season and only in the climate that is conducive for the growth of…

  • Acme Medical Imaging Analysis

    Acme Medical Imaging: Analysis of CaseHeading 11. What can be done to achieve cost reduction and lead time goals?The answer to the Acme’s failure to achieve cost minimization and delayed projects lies in their legacy that is being brought to the company by their very product development department. The department works in a haph-hazard manner with no specific guidelines on the deadline of each phase that is bieng carried out there. This not only gives excuse to the departments that will take over the job but also gives an impression to the employees regarding the lax attitude of the business. Thus in order to solve this issue, the legacy shall…

  • Write A Python Program In

    IDLEthat asks for the radius of a circle and prints theExecuteResultexecuted in 2.713 sec(s)Enter the radius of circle: 4Diameter: 8.0Circumfrence: 25.132741228718345Area: 50. 26548245743669Software engineering

  • I Need Help With The Assignment Below

    Students, please view the Submit a Clickable Rubric Assignment Running head: DESIGNING COMPLIANCE WITHIN THE LAN-TO-WAN DOMAIN Assignment 4DESIGNING COMPLIANCE WITHIN THE LAN-TO-WAN DOMAINStudent NameCourse TitleProfessor NameUniversity NameAugust 25th,…Engineering Technology

  • In …

    software engineering for postgraduates what is the answer to below question Apart from the risks of Common Project RisksRiskInsufficient resourcesavailable to perform thework Mitigating Strategy Explore various channels to secure resources, includinghiring new staff or involving…Engineering Technology

  • I Need Some Help With This Assignment

    Assignment 2: Implementing Network and Personnel Running head: ASSIGNMENT 2 1 Assignment 2Implementing Network and Personnel Security MeasuresStudent NameCourse TitleProfessor NameUniversity NameAugust 27th, 2016 ASSIGNMENT 2 2Assignment 2…Engineering Technology

  • Python Practice This Is A Python Practice I Really Need Some Help For The Following Two Parts Do

    Part 3: Echo (5 Points). Write a function called echo that takes as argument a list and returns a copy of that listwith each element duplicated right after it.. Here are some examples of how your program should behave on Python IDLE.gt;gt;gt; echo( [ ‘a’ , ‘b’ , ‘c’ ])[‘a’, ‘a’, ‘b’, ‘b’, ‘c’, ‘c’]gt; gt;gt; echo ( [ ‘x’ , ‘y’ ] )[ ‘x’ , ‘x’, ‘y’, ‘y’lgt;gt;gt; echo ( [85, 72, 61])[85, 85, 72, 72, 61, 61]gt; gt;gt; echo ( [85, quot;abcquot;, 6.79])[85, 85, ‘abc’ , ‘abc’ , 6.79, 6.79]Engineering Technology

  • Based On Your Learning Team Collaborative Discussion

    preparea 2- to 3-page security memo andMemorandumDate:To:CC:From:Subject: June 19, 2016 TCP/IP Security and Recommendation This is important to understand the computers networking which require for connecting the group of…Engineering Technology

  • Csis 341information Security Planning

    by-= SME-CSE. Information Security Planning:EXECUTIVE SUMMARYAn Information Security Plan (ISP) is designed to protect information and criticalresources from a wide range of threats in order to…Engineering Technology

  • Using Python Programming Language

    def choiceTest(s):valid = set(‘0123456789 ‘)return set(s).issubset(valid)def gcdRecursive(num1, num2):if num2 == 0:return num1else:return gcdRecursive(num2, (num1%num2))def gcd(num1,…Engineering Technology

  • Hi Can You Please Answer All 3 Question Asked By The Question?The Problem

    5.18 The following processes are being scheduled using a preemptive,priority—based, round—robin scheduling algorithm. Process Priority Burst ArrivalP1 8 15 0P2 3 20 0P3 4 20 20P4 4 20 25P5 5 5 45P6 5 15 55 Each process is assigned a numerical priority, with a higher number indi-cating a higher relative priority. The scheduler will execute the highest—priority process. For processes with the same priority, a round-robinscheduler will be used with a time quantum of 10 units. If a process ispreempted by a higher—priority process, the preempted process is placedat the end of the queue. a. Show the scheduling order of the processes using a Gantt chart.b. What is the turnaround…

  • Answer The Following Beam Design Question

    SAFR/AGLW/DOC/008 Irrigation ManualPlanning, DevelopmentMonitoring and Evaluationof Irrigated Agriculturewith Farmer Participation Developed by Andreas P. SAVVAKaren FRENKEN Volume V Food and…Engineering Technology

  • C Programming You Must Create The Code Described In The Picture Below And Given Are Two Example Executions Of

    Problem: Allow the user to enter a positive integer value to represent the seed value for the random numbergenerator. Next, generate a random integer that represents a possible number of points that a student may earn in agiven class (0 to a maximum of 1000 possible points). Calculate the corresponding letter grade that the studentwould receive based on the points earned using the minimums for each grade; A minimum 800, B minimum 675,C minimum 550, D minimum 425. In addition to letter grades the university requires instructors to report students that fail the class who were notfully participating during the semester. For this assignment that will be interpreted as having…

  • Please Help My Assignment!!!!Writing A Modular Program In

    Question Please help my assignment!!!! Writing a Modular Program in C++ Summary In this lab, you add the input and output statements to a partially completed C++ program. When completed, the user should be able to enter a year, a month, and a day. The program then determines if the date is valid. Valid years are those that are greater than 0, valid months include the values 1 through 12, and valid days include the values 1 through 31. Engineering Technology

  • At The Beginning Of Several Software Development Projects The Detailed Requirements Are Little Known Or Change

    Question At the beginning of several software development projects, the detailed requirements are little known or change drastically during of development. Why would it be necessary to take the trouble to go through the stages of requirements collection, the elaboration of the work breakdown structure, estimation, planning, etc. if we know that the requirements will change anyway? Software engineering

  • Literature Reviewthe Assignment Is A 4 000 5 000

    wordresearch assignment whereTopic on IT Service organization factors Some main Factors that always affecting IT Service organizationFirst factor: Management’s importance on deals – center on deals relatively than…Engineering Technology

  • Is It Possible Question ¨ What Are Some Of The Issues With Genetic Engineering?

    What are some of the issues with genetic engineering? Which do you find most dangerous and why? Is it possible Question ¨ What are some of the issues with genetic engineering? Which do you find most dangerous and why? Is it possible to draw from Ancient ethical insights to settle the questions surrounding the ethics of genetic engineering? Or are we in an entirely uncharted territory here? Philosophy

  • Ask The

    following question and give answers to the questionAnswer 1From definitions, δ ∗ = ∫ δ 0 (1 − u/U) dy, θ = ∫ δ 0 (u/U)(1 − u/U) dy; H = δ ∗/θ. δ ∗ is the (upward)vertical displacement of the streamline that comes from the…Mechanical Engineering

  • I Was Told To Rewrite The Algorithm Below To A Standard Algorithm I Am Not Sure If I Need An Exit Statement Or

    Question I was told to rewrite the algorithm below to a standard algorithm. I am not sure if I need an exit statement or not. Here is my algorithm and the image down below is the algorithm that I needed to rewrite: Function location (S, n, x, low, high) // S is an integer type that represented the sorted (nondecreasing order) input array of n integers // // n is an integer type that represented the input size of an array // // x is an integer type that represented the input key value // //low is an integer type that represented the minimum value in the array // //high…

  • Can You

    Question Can You help me to find the relational algebra for these three queries f, g, and h 1. Consider the following relational database:lives(person-name, street, city)works(person-name, company-name, salary)located-in (company-name, city)manages( person-name, manager-name)Give an expression in the relational algebra for each of the queries below:f. Find all people who do not work for First Bank Corporation.g. Find all people who earn more than every employee of Small Bank Corpo-ration. h. Assume the companies may be located in several cities. Find allcompanies located in every city in which Small Bank Corporation is located.Engineering Technology

  • Biotechnology Select One A

    is the use of technology to change the genetic makeup of living things Question Biotechnology: Select one: a. is the use of technology to change the genetic makeup of living things for human purposes. b. has raised many ethical questions. c. can make food more nutritious. d. all of the above e. Both A and B Engineering Technology

  • Mec 310 _ Homework 4 3 For The Offset Crankslider Linkage In The Following Figure (A) Derive The

    3. For the offset crank-slider linkage in the following figure [a] derive the expression for theangular velocity of link 3 and linear velocity of [in]: 4 using analytic VECtDr-hfififld methods {notcomplex number representation of vectors]. [IS points] [b] derive the expression for the angularaccelemtion of hnk 3 and linear acceleration of hnlt 4 using analytic vector-based methods. |9points] {c} Assuming that the link 2 at 45degrms in the global KY coordinate system, find theaccelemtion of point A and B in the global coordinate system for the position Shown if {as = 21}radfs clockwise. oonstant. [5 points] W (Eat-1 is 02 Mechanical Engineering

  • Questtion 2according To Dgi Data Governance Framework Information Management (Im) Is A

    Question Questtion 2 According to DGI Data Governance Framework, Information Management (IM) is a principal function of IT that is complex, spans through a number of subdisciplines and it can be defined as the ……………………? A.application of management techniques to collect information, communicate it within and outside the organization, and process it to enable managers to make quicker and better decisions, and win business deals B.application of management techniques to collect information, communicate it within and outside the organization, and share it with competitors to make better policy decisions C.application of management techniques to collect information, communicate it within and outside the organization, and process it to enable managers to…

  • It Leaders Often Need To Make Difficult Choices To Save Money Stay Competitive And Retain Or Generate Additional

    Question IT leaders often need to make difficult choices to save money, stay competitive, and retain or generate additional profits. The idea of outsourcing and perhaps offshoring has been mentioned as a possible consideration. Discuss the pros and cons of both outsourcing and offshoring. How might a leader introduce this to the organization without creating speculation and panic in its employees? What steps would you take to implement a digital transformation? Why? Engineering Technology

  • How Do I Solve This Problem A 1/4 In Diameter Rod Must Be Machined On A Lathe To A Smaller Diameter For Use As A

    Question How do I solve this problem, a 1/4 in diameter rod must be machined on a lathe to a smaller diameter for use as a specimen in a tension test. The rod material is expected to break at a normal stress of 63750 psi. If the tensil testing machine can apply no more than 925 lbs. of force to the specimen, calculate the maximum rod diameter that should be used. (precision 0.000)? Diameter of the rodA 1/4 in diameter rod must be machined on a lathe to a smaller diameter for use as aspecimen in a tension test. The rod material is expected to break at a normal stress…

  • Hi I Am Really Lost On How To Answer Dead Load Questions For Civil Engineering I Have Tried Using The Aygl

    Question 2 0/ 0 ts A floor consists of timber beams with solid rectangular cross-section of 350 x 45 mm, equallyspaced at 600 mm centres. A flat steel pan 2 mm thick and concrete 125 mm thick are laid ontop. Calculate the dead load of the floor system. The unit mass of timber is 600 kg/m3. The unitmass of concrete is 2,400 kg/m3. The unit mass of steel is 7,850 kg/ms. (Answer in kPa) Engineering Technology

  • Can Someone Help Me With This Question For Fan Efficiency In This Case Efficiency Is The Percentage Of The

    Question Can someone help me with this question for fan efficiency . In this case, efficiency is the percentage of the electricity to operate the fan. I already did the calculations to get the efficiency ratings. My first computation was 13.06% for the efficiency rating and my second computation was 9.37% for the efficiency rating. I did two computations just to see if I could detect unexpected results. I need help with the following steps: Mechanical Engineering

  • The Lighting Requirements Of An Industrial Facility Are Being Met By 700 40w Standardfluorescent Lamps

    Question The lighting requirements of an industrial facility are being met by 700 40-W standard fluorescent lamps. The lamps are close to completing their service life and are to be replaced by their 34-W high-efficiency counterparts that operate on the existing standard ballasts. The standard and high-efficiency fluorescent lamps can be purchased in quantity at a cost of $1.77 and $2.26 each, respectively. The facility operates 2800 hours a year, and all the lamps are kept on during operating hours. Taking the unit cost of electricity to be $0.105/kWh and the ballast factor to be 1.1 (i.e., ballasts consume 10 percent of the rated power of the lamps), determine how…

  • In This Question The First Step Is To Get Fr Value I Don’T Really Understand Why We Need To Get This Value

    Exercise 6Water is flowing at a velocity of 3 m/s and a depth of 3 m in a channel of rectangularcross-section. Find the maximum allowable size of upward step for the upstream flowto remain as specified.SolutionFr = –3V9.81 x3= 0.55 – The flow regime is subcritical.The unit discharge is:q=v*y=9m’ IsSpecific Energy in the cross-section is:32E=y+2g=3+2×9.81-= 3.459mThe maximum size of the step which will not change the depth and velocity upstreamwill be one on which the critical depth will be formed.The critical depth is:Fr’ =19.81x yeyo = 2.02 mThe Specific Energy on the step is:E. = =y. = =x2.021 = 3.033 mTherefore the step size is:Az = E-E. =3.459-3.032Az = 0.427…

  • Which Of The Following Could

    notbe a constructor for the public class Question Which of the following could not be a constructor for the public class SomeClass? SomeClass() int SomeClass() SomeClass(int a, String s) Statement I only Statement II only Statement III only Statements I and II only Statements I and III only Question 12 Which of the following would be best handled with an ArrayList? A list of all the states in the United States A list of cars that get 30 miles per gallon or better The names of the Seven Dwarfs A list of the ASCII code values A list of astronauts who have walked on the moon Question 13 Assume that…

  • Sec 420system Upgrade

    Please respond to the following:A batch file is a text for which contains a sequence of commands for a computer’s operatingsystem. This file is mostly delivered as part of an operating system. In any organization, thereare…Engineering Technology

  • Analysis of Economic Indicators Retail Sales and Personal Income

    Analysis of Economic Indicators: Retail Sales and Personal Income Teacher Analysis of Economic Indicators: Retail Sales and Personal Income According to Consumer Flow at Economy.com, the fundamental drivers of consumer spending, – which generates retail sales – in the near future in the U.S. will include rising interest rates, durable goods spending, and tightening labor markets. Rising interest rates typically depress sales of so-called big ticket items, those items usually purchased on credit, because the higher the interest rate, the higher the required payments. Personal income does not usually rise fast enough to absorb increases in interest rates. This is more likely to be an issue for people whose budgets…

  • A Letter of Intent for Dental School

     PERSONAL STATEMENTI, had hailed from a family wherein my mother had a degree in oriental medicine after working as a nurse for a while, my sister had graduated from a medical school and was working in Korea. I was a biology majors at college, came to the U.S in the year 2000. Medicine had always been my career choice. The seven semesters I worked in the UG biomedical engineering research lab . my presidential UG research award and the poster presentation at the BMES conference always led me to believe the fact that ‘medicine’ would be my choice of career. Being the secretary for the student club for a…

  • Analysis the Current Economic Crisis

    America had been the epicenter of scientific and engineering innovation throughout the 20 century. While the Civil War triggered off the entrepreneurial spirit in America and witnessed technological and scientific advancement in the 20th century, the period of five decades after the Civil War witnessed a virtual explosion of industrial growth. Additionally, the scale of the war convinced people about the viability of developing organizations of national scale. This belief, coupled with industrial growth, led to the development of gigantic business organizations.This period also witnessed the growth of nationwide transportation systems, like transnational railway lines and steamships and communication systems, like telephone and telegraph networks. These developments transformed the American…

  • Engineering Design Process

    Among the fundamental elements of the design process are the establishment of objectives and criteria, synthesis, analysis, construction, testing, and evaluation. (Engineering Design, 2006)problem, an existing condition in need of change, a challenge to look ahead for problematic conditions of the future, of design and construction. Because it is important for the engineers to be sure that they understand the problem thoroughly, the first step in the design process is for each group to state the problem. (Garmire, 2002)To recognise the problem requires the ability to think laterally, to anticipate the unexpected and to appreciate the aesthetics of problem solving as well as the material aspect. The aspects within which…

  • Questions about some uses of genetic engineering

    04 April 2008 Questions about Some Uses of Genetic Engineering Do you think there is a morally significant difference between positive and negative gene therapy The unacceptability of genetic engineering the society is often linked to the question of its morality. The article written by Jonathan Glover aimed to take a closer look at the issue by distinguishing from negative and positive gene therapy. According to the author, negative gene therapy involves the elimination of defects (4) while positive gene therapy aims to bring about improvements in normal people (4). It should be noted that both of these processes involve interfering with natural selection as they both alter the characteristics…

  • The Future of Privacy

    Systemic instruments come from the engineering process from networks to machines to computers to codes to protocols. These are the systems that are built into machines. Collective instruments come from government policy applied to provide protection of goods and services. These are the instruments that are built into processes. The instrument of individual empowerment requires individuals to implement privacy-enhancement during online transactions. This is the instrument of choice. There will not be a one-size-fits-all solution, though. PET should be thought of as toolkit. Each tool serves a particular purpose, but when combined, they achieve more than the sum of their parts. PET may be implemented such that the deficiencies of…

  • What are your short and longterm career goals

    Short and Long-Term Career Goals Throughout my life I have had only one goal in my mind. it was to run my own business and eventually an empire ownedby the family and so it has always been my long term goal. I took an early start in real world when I started working at the age of 16 and tried to understand things my own way. And after completing my graduation things became much clearer when I decided to do the masters degree in Financial Engineering to learn the core objectives of business. Globalisation calls for the companies to look all around the globe for investment opportunities under different sets…

  • LEXMARK International problems

    The company was able to send more accurate information for a very short span of time. This new system enables those connected to the business which include the buyers, financial analysts, marketing analyst, merchandisers, regional managers, and field sales representatives, to access or work on available data more instantly and easily.The bottom line of every business is to be profitable. And to do so, customer satisfaction should be guaranteed. Lexmark International has been successful in meeting the needs of its customers when it adopted the new system. Through it, the managers understood well the trends in their business, stock-outs were avoided and the demands of the consumers which vary from…

  • The Directors and Management of the Limited Company

    The disadvantages of the Material Requirements Planning system has been its coherency with the data, therefore the flaws present in the inventory data, the bill of material, or master production schedule will be transparent in the output, to avoid such failure and malpractice the vendors adapted to Material Requirements Planning demand minimum ninety-six per cent data integrity. The Material Requirements Planning system requires the user to identify the period it will take for the establishment of the factory, from the ordered component parts. The Material Requirements Planning system further assume the period of the establishment as lead time, which will share similar quantitative significance for every item, irrespective of the…

  • Significance of Metrology with Respect to Engineering

    If not, then it has to be re-examined so that accurate results are obtained. Among the post-process measurement, different measurement techniques and instruments are used. Usually, block gauge, micrometer, profile projector and coordinate measurement machines are used for post-measurement techniques.A block gauge consists of different sizes of lengths, holes, depressions, diameters, rectangle cross sections of perfect measurement. So a parts length or shape could be determined by comparing with a block gauge. Micrometers are also used in the post process measurement, they measure the outside and the inside diameters as well as thickness of the product. Profile projectors are used in a manner to project the part magnified on a…

  • Safety Management Systems In Aviation

    The technique is now being implemented in many countries like the United States. Canada is currently the leading country in terms of having safety management systems already in existence. Goglia (2008), in his book, Safety Management Systems in Aviation, provides a clear explanation of the appropriate safety precautions that aviation industries must adapt to reduce and even avoid accidents. He also outlines the four pillars included in the quality management of aviation industries. These pillars include risk management, implementation of the safety management systems, reliability engineering and the scientific rigidity designed into positive safety (Goglia et al, 2008). This book is of great importance not only to students of aviation…

  • Security Locking Devices

    This paper attempts to compare the two texts in the structure in which they have been presented with an eye for the way in which they have been presented. As far as possible, I try to minimize the use of technical jargon in describing the texts and instead use simple language to convey the sense of the texts that are being compared.I address the content presented in the text from the point of view of organization, structure, and style of presentation as well as looking for similarities in the text and pointing out differences. As mentioned above, both the texts are highly technical in nature and hence I limit myself…

  • Engineering Disasters

    Undeniably, engineering knowhow so far has immensely contributed to humanity’s wellbeing in diverse and numerous areas. This has enabled people to execute their tasks with heightened efficiency, speed and even producing varied products meant to support humanity’s survival. Some of these products include drugs, processed foodstuffs, vehicles and aircrafts. The Japanese Fukushima reactor meltdown incidence occurred due to manmade errors and carelessness (Girard 342). This is contrary to numerous claims especially from the government citing that the then coincidental earthquake exacerbated the incidence. According to the experts’ report, the government via its experts failed to utilize new and effective reactor designs. These could have ensured effective coolant regulation in the…

  • Artefacts (Idenitifying Materials)

    Quality assurance plays an active role in materials testing. Quality assurance carries out calibration test and manufacturing test. Calibration test is carried out to determine the workability of the measuring properties. Manufacturing test is carried out to determine the adherence to standardization. Some of the tests through which engineering materials are subjected to can be categorized as follows. Mechanical test These tests are carried out on the engineering materials to determine their strength, elastic constants, material properties and performance properties. Mechanical test involves testing the test specimen. The test specimen is obtained through the breaking of the original sample materials. Tensional test These are quasi-static test carried out on the…

  • The Environmentally Healthy City The Pressing Need of the 21st Century

    But, if humans want to sustain the oil supply, then they have to deploy alternative sources to power less energy demanding operations. The major operations such as construction and engineering equipment can rely on oil based products for the time being. But, it is also important to note that making a switch to alternative and eco-friendly power generation is an expensive state of affairs. The substantial amount of financial resources and infrastructure is required to test vast scale viability of all alternative energy sources. The importance of alternative energy production techniques in making healthy city possible is growingly becoming part of literature relevant to strategic planning and development. The previous…

  • ProcessFlow Analysis

    The Advanced Products Department (APD), which produces the specialty goods, has reformulated its corporate policy. In the early years, this company has built up and manufactured Echo Weather Satellites, which were launched into space. Three major diversified divisions of this company are: the material division, electrical goods, and advanced goods division. This study consists of company overview, SWOT analysis conclusion and recommendation regarding the company. Company Overview: Shipper Manufacturing Company has commenced its business in 1984 as a small organization, manufacturing bare copper wire in Missouri and Sikeston. With only a small number of workers the company started to market goods to electrical distributors in the area of Midwest. From…

  • Analysis of Business Excellence criteria

    This formula for such unflinching success has come through none of what management books could preach. The story behind the rise of Emirates Group lies in being an opportunist and seeking the opportunity at the right time and solving all their problems as and when they came through. This can be highlighted as one of company’s key strengths. Emirates has been working in a multicultural environment where the company seeks to address whatever shall keep the company motivated and ensure team functions to perform well. The key business practice is to keep things running as they are if they appear good, defying the conventional wisdom of not having any functional…

  • TBM

    ence we are able to determine total production per unit as follows: Product (Valves) Explanation Cost Manufacturing overhead (4.39% X 4) 17.548 Materials $16 Direct labor based on run labor (16% X 0.25) 4 Total standard cost $38 Pumps Manufacturing overhead (4.39% X 8) 35.096 Materials $20 Direct labor based on run labor (16 X 0.50) 8 Total standard cost $63 Flow Controllers Direct labor based on run labor (16 X 0.40) 6.4 Materials $22 Manufacturing overhead (4.39% X 6.4) 28.0768 Total standard cost $56 2. No change Contribution margin = Sales – variable cost Since Mary Ford stipulated that, In our situation, the only short-run variable cost is direct…

  • Assignment 3 Program of Study (POS)

    OVERALL LEARNING GOAL RELATED TO FIELD OF STUDY I would like to complete a doctorate in Applied Management and Decision science which is all aboutmaking good strategic decisions, both within an organization or while dealing with the clients. An emphasis on development and research in Engineering Management is also to be proposed. To put it in a nutshell, my objective is to pursue for necessary academic and research backup in Applied Management and Decision science in order to be able to plan, act and accomplish a project which faces both technological and managerial challenges. Thus I will become a independent problem solver in the near future. Within the Knowledge Area…

  • Dave Eggers Suggestion

    Failure of implementing the right policies and direction, leads to failure in life among the young and future generation. A frustrated Thomas takes into hostage seven individuals that he consider to have played a significant role towards his failure in life and questions then to ascertain the facts. The novel laments what the author considers the decline in American direction, purpose as well as backbone because the American dream is dead. In the very first instance, a reader understands the decline in backbone of the American society as Thomas questions his first captive an astronaut. Upon waking up, the astronaut finds himself tied to a post that is within an…

  • RELIGION IN PROMETHEUS

    We are then prompted to ask, what is the connection between science and religion? The key to Prometheus is the spoiler alert. In its proposition, the engineers with their religion of self-sacrifice are said to have seeded life on earth and elsewhere. Inferring from the film, the crucifixion of Jesus about 2000 years ago is said to have prompted a civil war among the engineers. The theme of the war was founded on the meaning of the Cross Event as practised on earth.Ridley Scotts Prometheus has become the most debated film of the summer. It is beautiful and significant and presents human questions that appear the most primary of the…

  • DIGITAL TECHNOLOGY

    Technology has a very wide range ranging from the simple tools such as the wooden spoon to the very complicated gadgets such as a particle accelerator and technological changes involved the evolution from using the simple tools to the application of the very complicated and detailed machines used today.The changes in technology has not only affected the education sector but the community as a whole as it has enhanced development in advanced technologies, led to the rise of leisure class among other effects.Technology started way back in the early stone age periods when man used his little knowledge and experience to make simple tools for various purposes and such tools…

  • KnowledgeIntensive Firms and Workers in the Southern Company

    With business and market environments that are constantly changing with globalization, firms from all sectors are called to embrace the use of technology and information communication systems, particularly to manage their knowledge assets (Poole, 2013). However, most organizations lack strategies that explicitly consider knowledge as a core component of firms and their business strategies. This paper evaluates knowledge-intensive firms and workers in the Southern Company (SO) which is a public utility company focusing on production, wholesaling, and retailing electricity in the Southeastern area of the United States (Ruiz, Benefield, Horton, Nielens, &amp. Akins, 2012). For more than a century, the Southern Company employees have been learning from their predecessors resulting…

  • Anthropocene

    MODERN ERA AS THE “ANTHROPOCENE” Modern Era as the “Anthropocene” The “Anthropocene” is a term that is always used in reference to the extent to which human activities have been of influence to the Earth’s ecosystem. Everything that the human beings involve themselves in usually have either an indirect or a direct effect to at least one aspect of the earth. The earth as it is now is not exactly how it was 200 years ago. A lot has to changed as a result of human activities. This paper aims at discussing why you think scientists increasingly refer to our modern era as the “Anthropocene”.Engineering and construction as one of…

  • The Elements of Typographic Style

    Graphic Design, which developed in Switzerland in 1950 was aimed at these tasks, and therefore the concept and methodology of the Swiss-style soon spread throughout the world. One of the areas where the emerging international style was the most in-demand, was the pharmaceutical industry. The largest Swiss companies that manufactured chemicals and drugs (Ciba, Geigy, Hoffmann-La Roche, Sandoz) to establish a modern corporate style appealed to the leading masters of graphic design – A. Hofmann, C. Gerstner, N. Rudin, J. Hemburgeru, J . Müller-Brockmann, and others. In Zurich in the 1950-s. the most prominent graphic designer was Josef Muller-Brockmann, who has chosen a new «anonymous» style. A graduate of the…

  • Why Don’t We Have More Practicing Women Engineers

    The above-mentioned news clipping revolves around the most current problem that is being faced by women engineers nowadays. The overall ethical structure of the society and more importantly that of a workplace has deteriorated so very much that day by day it is becoming increasingly difficult for the fairer sex to take advantage of it. The above mentioned current problem is very moral negating. After spending years pursuing a relatively challenging degree of Engineering the working climate forces women out of the practical exposure of their respective discipline. Since women form a major part of the country’s workforce this is a potential setback upon the economy of a country that…

  • The Psychological and Physiological Effects in a Promotion Process in an Engineering Industry

    A technical manager should have technical skills as well as management skills. It is not necessary that all the excellent engineers may become excellent managers. A technical manager should be able to implement the right strategy at the right time. Instead of going after the emerging technologies blindly, he should be able to apply a blend of proven older methods with the unproven emerging technologies. Problem-solving, risk-taking, decision making, flexibility in approaches, excellent communication skills, etc are some of the basic qualities required for a technical manager at present. The right decisions taken at the right time and implemented properly will help a manager to avoid problems. Some people believe…

  • Why Do We Need Environmental Engineering Topic LOVE CANAL TRAGEDY

    This led to protests, intervention by the government and multiple lawsuits in pursuit of the compensation for the affected residents. Most of them moved, the infrastructure brought down and the Love Canal crossed for revitalization processes by the Environmental Protection Agency.William T Love is the impresario behind the famous Love Canal as indicated by his last name (Johnson 1). Significantly, the core purpose of the canal was to connect the separations of the Niagara River that had Niagara Falls parting them. Moreover, the canal’s construction would be in a way that residents of the Niagara area would also source electrical power from it. typically, this was a prevalent idea for…

  • Ethical hacking

    One learner might make an impression on the other or port-filter the other understudy and both people might record the effects. The learners reacted with a lot of energy. After a week there were assorted types of strike from outside sources and the scholars started to archive these and to track down the sources. Significant devices here were tcpdump and tethereal for information catch. We needed each learner to get mindful of the powerlessness of the framework doled out to her/him, and this happened. One commonsense issue was teaching the scholars to give documentation in such a route, to the point that catch documentation gained was not excessively voluminous and…

  • The Most Significant Engineering Achievements

    Three hundred years is too long a time duration to choose the feats of engineering from, yet some accomplishments stand quite distinct amongst others…some of them include the International Space Station, C.E.R.N.s Large Hadron Collider, Palm Deira of Dubai, the Bird’s Nest in the Heart of Beijing, the Eurotunnel, Pan STARRS-1 and what not? But to seek three of the ‘most’ significant engineering achievements we must not only consider their impossibility of construction/achievement but also the effectiveness, utility and their role in the development and advancement of other future innovations.&nbsp. The first most significant Engineering Achievement out of the three would be ‘Electrification’ – the modification of a system so…

  • The Safety of Building at Oklahoma State University

    The building has 4 stories inclusive of a basement, with an “I” shape with the longest part spanning from East to West with 6 doors providing an exit for the people. The building can be accessed by the fire department via Hester Street. Engineering South’s basement is mainly utilized for storage of maintenance equipment. There are also rooms in the basement that are used as offices whereas others cannot adequately tell their use since they are always under lock and key. Going by the number of rooms available in the basement, it is quite clear that only about 17 workers can be accommodated at any given time. The floor, as…

  • Lost Foam Casting

    5 1250 The pattern is made through the use of polystyrene foam. If the cast is to be made on the basis of a simple geometrical form, then the use of a hot wire foam cutter can be done. In case the volume of casting is large, then a mass production usage pattern is sued which is similar to the injection molding technique. The foam cluster done for the casting is coated with ceramic material via the use of brushing, dipping, flow casting and spraying. This form of coating is known as the refractory coating technique. After this coating dries, then the cast is put into a container and baked…

  • Identify the heightened audit risks areas of James Cropper Plc and carry out the audit procedures to reduce audit risk to an acceptable level of one area

    The converting segment on the other hand offers picture mat boards printable boards and a selection of of laminated and coated papers. The Technical Fibre Products is in charge of non-woven materials used in different areas such as the engineering of composites thermal insulation, fire protection and other insulations. The areas of operation of the company comprise of Europe, United Kingdom, America, Asia, Africa and Australasia having been headquartered in the United Kingdom.Today’s business has been changing with a very tremendous speed. The business world has become constant in that it is changing constantly making it unpredictable, complex and very volatile. This has in turn changed the previous levels of…

  • Simon Chance the owner and Chief Executive of Junction Hotel is seeking to increase the effectiveness of the hotel Drawing on theories of rational organisation and at least one of the following topic areas 1) psychological perspectives 2) organisational

    mon Chance, the owner and Chief Executive of Junction Hotel is seeking to increase the effectiveness of the hotel and to address the above listed weaknesses. The aim of this paper is to research how the theories of rational organization and psychological perspectives (personality and motivation) can be applied by Simon Chance in order to increase the effectiveness Junction Hotel and to ensure long-term success of the hotel.The definition of “rational model” also called “machine” model is applied to an organization, which is viewed as “an instrument, a set of interrelated means contrived to achieve a specific end” (Astley &amp. Zajaz 1991, 402). Thus, rational organizational can be characterized as…

  • Application of Porters Five Forces on Construction Sector

    The work includes the building of roads, bridges and other major infrastructures. The real estate business is also urban-based. so the constructions companies need to base all their business activity in urban areas in order to complement the real estate industry. The repair and maintenance of existing buildings and other infrastructures also fall under the domain of the construction industry and its major business comes from the densely populated urban areas. This is due to the fact that the more usage of infrastructure in densely populated urban areas results in higher damages and hence is subject to repair. There are mainly three categories in which the construction industry is divided.…

  • Comparison of market structures of US retail and housing industry

    16 4000 Where there are four types of market structure which are monopoly, oligopoly, pure competition and monopolistic competition. there are number of factors which determine the market structure which are number and size of firms in the particular market, degree of similarity with competitor’s product, firm’s control over its product’s prices, barriers to entry and exit in the market, and the amount of competition based on non price factor. USA housing industry is classified sector wise in mining, construction, manufacturing, retail, wholesale, real-state, professional, administrative and other. These sectors are interdependent on each other in terms of performance and growth. The effect of US crises on housing industry was…

  • Soil bioremedation

    12 3000 For instance, a recent report by Wu and Yu (2011) indicated that the issue of environmental pollution in China has reached an alarming extent. Specifically, the article reported that as of 2011, one-sixth of China’s agricultural land has been contaminated with mercury, cadmium, copper, and other heavy metals (Wu and Yu, 2011). According to the Chinese Academy of Agricultural Engineering, this fraction of land is equivalent to approximately 20 million hectares, with the industrialized regions being more critically affected (Wu and Yu, 2011). Heavy metal-contaminated grounds have been shown to greatly affect the floral, faunal, and microbial communities (Lukkari et al., 2004. Agoramoorthy et al., 2006. Chen et…

  • “Outsourcing Supply Chain Support and its Effectiveness and Implication in R&amp

    D Environment in Singapore"and Objectives 1.3 Research Methods 1.4Significance of Research 1.5 Dissertation Outline 1.6 Conclusions Chapter 2: Literature Review 2.1 Introduction 2.2 Information Sharing and Outsourcing 2.3 The importance of Information sharing in Outsourcing 2.4 The risk factors of Information sharing 2.5 How much information can be shared? 2.6 How to ensure effective information-sharing 2.7 Conclusion Chapter 3: Research Methodology 3.1 Introduction 3.2 Research Approach 3.3 Research Methods 3.4 Research Design 3.4.1 Sample 3.4.2 Method of Data Collection: Interview 3.4.3 Research Instrument 3.4.4 Method of Data Analysis 3.5 Research Validity and Reliability 3.6 Ethical Considerations 3.7 Conclusions Chapter 4: Findings 4.1 Introduction 4.2 Part A: Findings from i3lab 4.2.1…

  • Analysis of Work of Benjamin Spock about Gender Roles

    Gender role is an intriguing subject that takes into account of several aspects. One can argue that gender roles emerge from culture due to various reasons. Cultures adhere to gender roles because they assign responsibilities to each gender based on family needs. For example, women in eastern cultures have to follow the cult of domesticity. The cult of domesticity is a generic phrase for women to stay at home, clean the house, cook the food, and raise the children. In this model, the men are the bread winners. Since women rely on men for financial support, it is almost unorthodox for women to work outside the house. The idea of…

  • Building Information Modelling

    This development has particularly been important in the engineering field in which some stakeholders develop models and different stakeholders who interpret the developed models simulate their properties undertake the constructions for achieving reality. Ensuring ease and success of such simulations has further prompted the need for standardization in modeling and communication of developed models in engineering. Of particular interest to the scope of application of information technology in engineering and modeling is the concept of Building Information Modelling that defines establishment and management of digital models of physical and operational features of a facility. The concept has been approved for its advantages and is being advocated for among government contractors.…

  • Evaluating Civil Engineering in Modern Day Technology as a Career Path

    Civil engineers are analytical thinkers and are more comfortable dealing with concrete facts. When presented with a problem, they like to solve it. I have selected Civil engineering because of its importance in the everyday life and the solutions it gives to the various problems being faced by human beings on Earth which have originated due to the scarcity of resources. Selecting Civil engineering as a profession directly influences the every day life of individuals as the impacts of the environmental issues, the problems due to rapid urbanization and limited resources are equally evident to each and every individual of the society and every individual of the society is equally…

  • Impact of climate change on timber engineering structures

    The differing opportunities and threats posed by timber structures and climate change are outline below.1. TIMBER STRUCTURES AND BUSHFIRESClimate change has been related to bushfires directly and increasing temperatures have been taken as a sign that bushfires are only bound to increase in the future. An estimate puts the change in temperature due to global warming in Australia between 0.4 and 2oC by the year 2030 above the 1990 levels while the change by 2070 is projected between 1 and 6oC. (Preston &amp. Preston, 2006) It could easily be expected that the exposure of timber to bushfires would result in the timber structures being damaged beyond repair by fires. However…

  • The Rise and Fall of FLAVR SAVR Tomato A Delayed Ripening Tomato

    6 1500 They are accountable for the overall predilection of an organism and what the organism is going to be. Humans are utilizing their potentials to explore and reveal the surreptitious lying uncharted. The advent of genetic engineering has revolutionized this investigation procedure. Genetic manipulations are being performed to bring out the best by altering the genetic make-up of the plants as well as animals. Initially, the process was initiated with the micro-organisms and now it has taken a prominence in the food stuffs, where genetic amendments are paving way to take a form of revolution in the food industry. The biggest question that ponders in the mind is regarding…

  • Leonardo DiVinci

    The latter was highly impressed with the boy’s talent and Leonardo thus “entered the studio” of an artist and sculptor, where he met several other craftsmen, including Botticelli and Lorenzo Di Credi (Brockwell 4). The interaction he had with many such artists had a profound impact on him and it also bred in him a sense of competition. The most unique trait about Da Vinci was that he had ventured into all areas of “human learning” and left an indelible mark there (Brokwell 4). He, thus, nurtured a yearning for attaining perfection over his peers and became one of the most renowned artists in this world. His legacy to the…

  • “Arts &amp

    Visual Literacy"As it can be seen from the image above, the sculpture is a giant concave mirror that reflects the sky. It is made of stainless steel materials that reflect the open sky from its concave part. It sits on white granite that is designed with precision to finish its beauty. This image is a photograph of the sculpture that was installed at the entrance of Oceanographic Museum in Monaco in 2003. However, there are other similar displays that have been installed in the vicinity of most phenomenal monuments, museums and historical public places in various countries. For instance, one similar sculpture was installed at the entrance of Channel Gardens…

  • Anyone Can Be an Entrepreneur

    From the economist’s point of view, an entrepreneur is an individual who brings together labor, resources, materials and other valuable assets into a combined form that brings out a value that is greater than before. An entrepreneur can also be defined as a person who introduces innovations, changes, and some form of the order. The psychologist says that such individuals are driven by certain internal forces of the urge to attain or obtain something, to accomplish, to experiment, or just to escape the authority of other individuals. To a business person, an entrepreneur will be treated as a threat or an aggressive competitor. Again to the same business person, an…

  • Project closing

    Delivering business presentations has turned out to be part of many people’s lives. Power Point slides have become common for businesses or sales presentations. Microsoft Power Point software allows creation, management, and display of presentations to the audience. It helps in the description of ideas in a more detailed way to enable those who might be lacking the technical knowledge digest the subject matter. The presentation quality will determine the success or failure in achieving the desired objective, whether it is selling a product or selling an idea to the management. In Terry’s case, Power Point presentation contained technical information, and it was appropriate for engineering students (Rutledge &amp. Mucciolo,…

  • Critical summary

    The song dynasty The song dynasty was a dynasty that started in the year 960 and continued until the year 1279. The dynasty succeeded over five dynasties and other ten kingdoms. The Yuan dynasty emerged after the song dynasty. The dynasty was the first dynasty in history to experience civilization through the issue of banknotes or paper money. Additionally, it was the first Chinese government to identify and obtain a permanent navy. Social and cultural practices, economy, and civilization are the main ideas in this section. However, civilization includes the use of paper or bank money, use of gunpowder, the idea of trade, science, movable type printing, and engineering (Ingram).…

  • Fiat Business Case

    Additionally, it was also felt that the company was very late in addressing the quality issues related to its products. This delay in improving the quality of its products dissuaded customers from buying Fiat’s cars. This was also a major reason because of which Fiat was not able succeed in the American car market despite its affordability and this also lead the company to withdraw itself from the American car market.Towards the end of 1990s, the company also experienced a financial crunch due to its diversification measures. The acquisitions made by Fiat Auto during the period contributed to its problem since the performance of some of the acquired businesses was…

  • SacroOccipital Technique (SOT)

    Similarly, he attended the Nebraska College of Chiropractic where he obtained a degree in 1924. He studied the works of leaders in both osteopathic and chiropractic professions incorporating his engineering background because he felt that there were contradictions within the professions. He divided his time to both the practice and researching the principles of chiropractic techniques until his death in 1992.This technique was developed by Major DeJarnette during his years in patient care and research while seeking chiropractic treatment. This method was designed because of the need to assist the chiropractor to locate and correct a distortion in the primary pattern of the body.The procedures used in diagnosing Sacro occipital…

  • Hate running the mile in PE

    HATE RUNNING THE MILE IN PE Nursing As My Professional Career Nursing career is a profession that is quite challenging to achieve, yet the most demanded in the current world. My goal is to become a Nurse a Practitioner in a recognized institution. In order to accomplish my goal, I intend to enroll in the University of Phoenix and complete both bachelors and master’s degree in the nursing profession. I am aware that for one to pursue nursing profession in university of phoenix, the entrance average is extremely high. In addition, other few things may affect my accomplishment1.Firstly, admission fee required is extremely high, and my parents may not manage…

  • Information Engineering Analysis and Design

    The Delauny’s Medical Centre System project primarily represents an information system that avails booking services on an online friendly platform. The service will enable the prospected patients to make appointments with doctors on the online system. The main features of the services that the online Medical Centre platform entails registration of new users, making appointments, scheduling and cancelation of appointments.The writing in this report predominantly highlights on the descriptive processes utilized in designing and developing the system. The methods used in planning the project development cycle and the management criteria also highlights in the paper. Scheduling, forecasting and achieving project goals are vital activities that have to be undertaken by…

  • People in History

    This paper has selected Herbert Hoover and Frances Perkins as its two discussions who are considered to have played key roles in forming the America we know of today.Herbert Hoover, the 31st United States President, was born to a Quaker home and specialized in mining engineering (Hoover 19). He attained American and global prominence in humanitarian liberation efforts, in Belgium war-time, and worked as chair of the United States Food Administration throughout the First World War (Schiff 66).Hoover, an internationally qualified engineer, believed greatly in the Efficiency Movement, which detained that the government, as well as the financial system, were puzzled with inadequacy and waste, and could be enhanced by…

  • GMO products

    Biotechnology in Genetically modified foods al Affiliation: Genetically modified foods are products that have been manipulated by introducing organisms whose DNA structure has been changed slightly using genetic engineering methods. This allows several alterations in the way the plant grows and also the quality of the yield.(Liang, 20). There have been controversies and debates over the years on whether or not these foods are harmful to man. These plants are engineered genetically in the laboratory by changing their genetic structure and make up and then tested to check if they have acquired the desired results and quality.The engineering involves either adding a gene or genes to the plant’s genome or…

  • Developing a Compensation Strategy

    9 2250 As the paper outlines, with the focus on the total compensation strategy of Wilson Bros, the pay philosophy reveals the foundation on which the compensation strategy is placed. The existing pay system for the employees entails financial compensation in the form of wages and salaries, incentives and the indirect forms of compensation. The engineering architectural company utilizes the services of employees equipped with a wide range of skills. There are construction architects, the constructions experts as well as landscapers. It’s a business strategy that shapes the competitive advantage is to keep around these services by integrating a total compensation strategy that outperforms that of its competitors. At Wilson…

  • Organizations digital investigation process

    5 1250 The occurrences can be triggered by internal and external factors and can cause considerable damage or loss to an organization directly or indirectly. For instance A contingency plan should be devised to mitigate such incidences. A framework formulated will prepare for both low frequency/high impact as well as high frequency/low impact events in the organization. This paper details investigation procedure at Salford university school of computing science and Engineering. Our case study will focus on server intrusion in the university school department. An incident of server intrusion to the university system occurred, and a contingency plan formulated to authenticate the suspicion, respond and analyze the incident. Due to…

  • Answering quistions regarding to the personal statment

    Reflection on Feedback Question Self-awareness has the prospects of making me strive to gain the sets of skills, understandings,achievements and personal attributes, which give me the likelihood of being employed, and being successful in my selected occupation. Self-awareness therefore makes me be able to know my competence in leadership, problem solving, and effectiveness in communication and my ability to blend in and work in teams. In my field of network engineering, qualified engineers are instrumental in growth and emerging sectors and this is largely on the basis of practical and technical knowhow whose level be reflected in self awareness. In view of this self-awareness would give me the impetus for…

  • Position of Industrial Engineer in the Plant

    I majored in Industrial Engineering at (name your university), class of 2014. Since high school, engineering had been my passion which explains my major. My forte in Industrial Engineering is Systems Design and Analysis and Project Management. I also took an internship at Acme Company as an Assistant Industrial Engineer and the experience provided me with valuable insight into the real world of engineering where my knowledge was used in a real-world work setting. I am also a member of the Engineering Club in University which supplemented our expertise from knowledge from various aspect of engineering such as electrics engineering, avionics engineering making our perspective about engineering more complete. I…

  • Case assignment Rising Cost of Prescription Drugs and its affect on MEDICARE

    Affordable Prescription Drugs Module 4 Case Assignment 02 December This paper deals with the question of obstacles, barriers, and pitfalls that may influence the rising cost of prescription drugs and the effects on Medicare. It primarily draws on two arguments: the first by Johnson (2009) that the battle for market share between name brands and their generic counterparts has the potential to extinguish innovation. The second, by Walsh (1999) argues that the large pharmaceutical companies have no price restrictions levied against them, and can structure prices however they like. Finally, the corollary is drawn between these two phenomena and how Medicare recipients get caught in the middle. Affordable Prescription Drugs…

  • Engineering Materials

    The bondage between the molecules is broken. In this region, the material can regain its original shape after the removal of the loading or rather the stress. At this juncture, the material obeys Hooke’s law and the stress and strain relate proportionally, and the constant of proportionality is the modulus of elasticity. The structure of the particles is not altered which explains the reason the material regains its original shape after the removal of the stress. It is the region just after the elastic limit. It is characterized by the graph flattening indicating destroyed proportionality between the stress and strain. Plastic deformations creep in, and the material loses the ability…

  • Information System Engineering (Case Study about system requirement)

    The purpose of this report is to elaborate the system design features for its better implementation.The Children Support Agency (CSA) has emerged as a national charity based organization for the betterment of the UK’s young people. This organization has aimed to facilitate young people of UK for their career and support them for spending their lives effectively.CSA has developed their setup very effectively and they have their central office in London. Recently they have moved their two main offices, a small one in London and a larger one on the South Coast of England in Brighton.In this situation this organization has running lot of projects on diverse domains, for the…

  • “Initiating Change in the Manufacturing and Distribution Division of PolyProd on page 241246 in the Cummings &amp

    Worley tex"Initiating Change in the Manufacturing and Distribution Division of PolyProd PolyProd is a giant engineering corporation faced with change management concerns at divisional level. Manufacturing and Distribution Division of the company has to handle sophisticated information management system subjected to enormous amount of data, information as well as knowledge. Managing sophisticated information system has started to impact on some of the company’s abilities to keep abreast with altering business climate. Manufacturing and Distribution Division is faced with the task of implementing change management strategy so as to sustain both internal and external change thrust (Cummings &amp. Worley, 2009).PolyProd is an epitome of failing to upgrade existing information management practices.…

  • Operation Management in Winning

    The bibliography also describes the founding of Apple Incorporation by Steve Jobs along with his mate Steve Woznaik. Among the various facts those exhibited the gradual development in the skills possessed by Steve Jobs, the author delivers considerable stress on the tough competition faced by the introduction of Microsoft in the computing technology market, which indicates his entrepreneurial and leadership techniques. As observed, to face competition, it is necessary to be aggressive, which was the perspective of Steve Jobs, who also perceived that only differentiation could increase potentials of success for his company. Consequently, Apple became much emphasised on introducing new products more rapidly, as a measure for its competitive…

  • Report on an engineering hero

    Engineering Hero Engineering Heroes Cromwell Fleetwood Varley One of the highly renowned engineering figures of all time is Cromwell Fleetwood who started by operating in the field of spiritualism during the period of 1850 and was even recognized for his attachment with one of the greatest communication companies named Atlantic Telegraph Company and was even associated with the renowned power company named Electric and International Company (Shepard, 1991, p.1764). One of his greatest achievements was the exploration of the hypothesis that electric energy was the force that caused the outcome of table rapping. He is even popular for having psychic abilities such as the power of healing the ill, which…

  • The AMA Handbook of Business Letters

    This means that I will cut the attendance time down to one day per week against the previous arrangement of five days. For the projects in progress, I will be able to honor and complete my contractual obligation, and thereafter I would advise you to seek another engineering contractor who will continue to provide you with similar services. I look forward to continuing working with your company. Thank You Referral letter I am a professional surveyor who has been in the field for the past ten years and would like to take this opportunity to approve the services offered by this engineering firm. Located near junction 10 on the M50…

  • Human cloning and stem cell research

    Human Cloning and Stem Cell Research Scientific research has in the last few decades have made stunning advancements in a broad array of fields. Some of the most prominent advancements have occurred in terms of human cloning and stem cell research. This technology holds a wide variety of implications both for medicine as well as for the accompanying ethical concerns. Institutions such as the Roman Catholic Church have found themselves in direct conflict with secular scientific perspectives that hold firm to the belief that such technology is not only effective but also necessary for the progress and betterment of humanity. This essay examines prominent scientific and ethical elements related to…

  • Collegiate Function Transfer Programs Transfer and the Liberal Arts

    The collegiate function encompasses the transfer and curriculum between two or more learning s. The actual transfer discussed in this paper is the initial enrollment at a community college and the subsequent admission at any four year institution. For a student to be eligible for such a transfer, they must renounce their enrollment in the community college. There are agreements developed by the educational stakeholders including the state, the community colleges and the four year course institutions. These kinds of agreements have been referred to as articulating agreements which are laid down to regulate the flow of students to and from the various institutions. The transfer policy was established with…

  • Harvard referencing

    10 Examples of Harvard referencing of items as required Al-Madhoun, M. &amp. Analoui, F. (2004) Developing SME managers under fire: negotiating obstaclesand weaknesses in Palestine, Journal of Management Development, 23 (5), pp.479-495, IngentaConnect [Online]. Available from: http://www.ingentaconnect.com (Accessed: 9 June 2005).Fedchak, E. &amp. Duvall, L. (1996) An engineering approach to electronic publishing, Proceedings of the International Workshop on Multimedia Software Development, 25-26 March, Berlin. Los Alamitos, California: IEEE Computer Society Press, pp.80-88.Harris, A. et al. (2006) Management skills. Oxford: Oxford University Press.Jones, A. (2005) ‘Accessibility in HE’. In: Smith, P. (ed.). Accessibility for the Web. Safari Tech Books [Kindle DX version], Ch 2, Location 345- 349.Lugar, G.F. (2001) Artificial intelligence:…

  • Provided in the Doc

    etic technology because it has a lot of drawbacks such as. hair loss, nausea, diarrhea, or death and significant number of the operation to replace the cancer cells without using this technology face failure.Chemotherapy is the principal cancer treatment modality which has decreased cancer mortality rate over the years. Chemotherapy causes setbacks such as nausea, diarrhea, and hair loss. Nanomagnetic technology is a scientific advancement in biomedical engineering that offers a safer alternative to chemotherapy.Chemotherapy was unspecific in its action thereby had the risk of damaging healthy cells. Cases where nanomagentic technology was used, recorded fewer risks. Biomedical engineering should, therefore, be recommended as a safer alternative to chemotherapy as…

  • Climate Change Issue

    It is time we think seriously on the climatic engineering more so on the geo-engineering aspect to curb the global warming through carbon dioxide and solar radiation management. Climate change over the years has been approaching tipping point and from the trends it might soon reach to a new irreversible points due to changes of composition of gases into the atmosphere and oceans by the emission of greenhouse gases such as carbon dioxide and methane. increasing the global temperatures which is associated with hazards such as excessive melting of Green ice and Atlantic ice sheets which pose a great environmental danger to the ecosystem thus an alternative measure to curb…

  • BIMStorm Presentation at Healthcare BIM Consortium by Onuma

    Essay, Engineering and Construction My choice of video is BIMStorm presentation at Healthcare BIM Consortium by Onuma, Balfour Beatty, Broaddus and several other people. . The video is footage on the how the company through its sponsors has transformed the construction industry. Essentially, BIMStorm videos provide good framework in data construction in an innovative way and significantly provides new approach to business. In this case, various presentations by the different affiliates are provided in clear manner to highlight just how much BIMStorm has made work easier and promoted their businesses growth. Kevin Ellis a technical account manager explains that BIM basically takes different technologies and merges them to work together…

  • Knowledge management and knowledge engineering

    6 1500 I know these topics because I have interacted with them and understand their characteristics or aspects. The topics I have information about are a company’s annual report, the weather of my location, the weather of another location and the content of a television news program. These topics only present data that has been contextualized. The primary characteristic that distinguishes knowledge and information is my interaction with a situation. Situations in which I interact with a topic and confirm the available information lead to the creation of knowledge about the topic. Situations in which I have contextualized data are informing situations. The series of readings can be transferred into…

  • Compare two suspension bridges

    It is worth noting that both the Rhone River- Roquemaure Bridge and the Verrazano-Narrows Bridge in New York are suspension bridges, with the latter having the distinction of being the longest bridge of its kind in all of the United States (Kable 2013. Denenberg n.d.). The Roquemaure Bridge spanning the Rhone River in France, on the other hand, is a suspension bridge that came to replace an older bridge known as the 1835 Roquemaure Bridge, which still has a section in existence astride the present bridge, as a relic. The bridge is noteworthy for being one of 42 bridges in history that have spanned the Rhone River, and has steel…

  • Anti discriminatory practice

    It can be direct, as when a particular group is adversely targeted, or indirect, when one group is given preferential treatment to the detriment of another group. Discrimination can occur on an individual plane or as institutionalized discrimination, in which the organization itself is structured against particular groups (Webb, 2004).Discrimination can be based on gender, sexual orientation, age, race, religion and disability. Gender discrimination is widely prevalent, from female infanticide to glass ceilings in the corporate world. It is seen in employment policies which are biased against women in recruitment, sexual harassment in the workplace, resentment against pregnancy and maternity leave, fewer chances for promotion and training and unequal pay…

  • Citrus Electronics

    Business Business As a modern enterprise, Citrus Electronics aims at providing exclusive and innovative design solutions to the consumer as well as meet industry-specific requirements in the UK. To accomplish this, it needs to have the capability of managing the customer order process. The customer order process is increasingly becoming complex whereby orders comprise of parts, make-to-order products, and customized units. For efficiency of customer ordering process, customers will have to place orders with a customer service representative of the company. The representative has to be keen to categorize the orders in sections of retail customers, or industry sectors. Standard orders normally contain information about the customer and the items,…

  • HIM 330

    HIM 330 The main focus of this research paper is on the development of a practice management system for a clinic treating patients who suffer from cancer. The location of this clinic in rural setting has made most of the patients not to have health insurance coverage and instead to depend on Medicare and Medicaid. The assumption is that the system will cost $150000. Therefore, the paper will give an indication of the way different feasibility studies will be conducted, the identification of strategy for executing requirements elicitation, together with all steps necessary for requirements elicitation, based on the above stated problem, and finally, the paper will give an example…

  • To Whom It May Concern

    To Whom It May Concern I must confess that I had a distinct contentment being an internship supervisor for Jingneng Zhao for a period of 2 months at INTECSEA. I have been Zhao`s direct supervisor in the Floating System Department. His exemplary performance in the organization is something that cannot be detached from him. Throughout the entire process, Zhao proved to be more than just the ideal student. Working as a structural intern engineer in the Floating Systems Department, it is notable that Zhao was able to successfully and efficiently accomplish all the tasks assigned to him within the required time. During the internship, Zhao showed a mastery of the…

  • Report of Steve Jobs (biography

    n society, principally through his charismatic pioneering of the personal computer revolution, further influencing the consumer electronics and computer fields.Steve Jobs is widely known as one of the greatest managers to have ever lived because of his style of leadership and success. As portrayed by Isaacson, during an era when the American nation still seeks avenues of adequately sustaining its innovative edge rivaled by other global societies striving towards building digital-age economies, Jobs characteristically stands out. A successful leader is one who is able to standardize operations and supply chain management issues in a company that he operates (Russell and Taylor 3). Steve Jobs was successful in this by ensuring…

  • Management of Change

    Management of change Management of change- Howard and Johnston Pty Ltd Introduction Change management is a critical component of organizational improvement and entails all processes, tools and techniques that are used in entrenching change in the organization (Cohen 2005). Change requires the support of people within the organization such as the culture, environment, processes and relationships among the employees. Change is occasioned by new policies, systems, processes, political changes, social changes, economic changes and advancements in technology (Cohen 2005). Howard and Johnston Pty Ltd (H&amp.J) has been one of the largest civil engineering companies with large projects in Snow Mountains project, Hume Weir and Warragamba Dam. The company earned big…

  • 1 Organizational Environment

    The company, via Google Reach, sends a number of Googlers (Google employees) to a developing region to assist local firms and small enterprises deal with development challenges. For instance in 2013, forty seven Googlers were able to travel to Delhi in India and Ghana in Africa. Googlers as they are known, claim they pride in telling others where they work. Google has around 26,000 employees in the United States and 40,000 globally. Googlers not only take incredible pride in what they do, but 99% claim they enjoy unique and special benefits offered by their employer (Halbert &amp. Inguli, 2014).This paper discusses how Google has been able to utilize organizational behavior…

  • How to bee agood leader

    My research has shown me that task oriented skills as well as communication and interpersonal skills are very much necessary for effective team leadership. Similarly, facilitating the group processes is a significant role of the team leader and timely execution of the task necessitates proper planning, organization, coordination, decision making and problem solving skills, motivation, and sharing of roles from the part of the team leader. Besides, as a team leader I should be a good listener and communicator. I need to communicate my visions to the team members while listening to their valuable suggestions. As my major is in electrical engineering I would prefer to assume a team leader…

  • A Position as an English Teacher

    EDUCATIONAL BACKGROUND October 2011 to Date: Ph.D. student in Language and Foreign Culture, specializing in English at the University of Lyon (Universitè Lyon2). September 2010: Completed a Masters degree in Humanities and Science, Language and Foreign Culture, Specializing in English at the University of Lyon (Universitè Lyon2), France. June 2007: Studied in English Maitrise, an equivalent of Masters of Arts (MA) in Humanities and Human Science, Language and Foreign Culture, Specializing in English at the University of Lyon (Universitè Lyon2), France. March 1999: Studied Bachelors Degree specializing in English Language Translation at the Islamic Azad University, Tehran, Iran. March 1996: Obtained an F.C.E (First Certificate in English), from Milad Language…

  • Occupational Safety and Health Administration

    1. Permissible practice – Permissible practices include primary means to control occupational diseases caused by atmospheric contaminants by accepted engineering control measures and when these measures are not feasible, appropriate respirators shall be used. Employers are responsible for establishing and maintaining a respiratory protection program, which will cover all employee using respirators. 2. Respirator program -The employer needs to develop, implement and update written respirator program which will include specific worksite procedures and will be administered by trained programme administer to employees free of cost. 3. Selection of respirators – Employer must choose appropriate respirators for employees considering the hazards, workplace and user factors that affect respirator performance and reliability.4.…

  • Do Aircraft Engineer of Oman air believe Inadequate training in aircraft Engineering sector of Oman is the main cause of low standards in maintenance of Oman Air aircraft

    For example, training and development lead to the development of new skills and expertise of employees. However, in some sectors, training and development are necessary for performing the regular activities.Training and development activities present prime opportunities to expand and enhance the knowledge base of the employees. Even so, some employers find the same to be expensive and hence, financial loss of the company. For example, employees often miss out on work timings while attending the training and development sessions and this might delay the completion of project (Kenny &amp. Reedy, 2007, p.121). Despite the potential drawbacks of training and development activities, companies consider these to be a core functional activity…

  • Working in an Oil Company Using Education in Engineering

    Dear recruiting manager, Responding to your request to submit my resume to you for consideration in job opening after my graduation, I would hereby wish to provide my official application for the position of Flow Assurance Assistant in your organization. I have been involved in Flow assurance, business development, project management, and petroleum engineering activities in the companies where I have worked before. My interest in writing and drawing gives me a good foundation to engage in activities related to flow assurance design. I can also write good engineering reports and play a good role in project management teams. For the past year, I have been engaged in fieldwork activities…

  • Professional certificates of software engineering

    Software Engineering Certification Software engineers should also face a certification ity before they get down to practicing their learnt skills. Certification processes are meant to guard and protect consumers of services, as well as the software engineers themselves from unscrupulous clients and the difficult market. This is crucial for the benefit of any economy that wishes to claim authority over its workforce and show off its ability to sustain itself. As a result, software engineers need to undergo a certification process for this to be effective and for the services provided to be considered as genuine and worth their cost. There are a number of reason for which certification is…

  • Te Uku

    t which is the first of its kind in New Zealand was commissioned in 2010 and successfully built by a joint alliance between a giant electricity generating and retailer company known as Meridian Energy and WEL Networks which is a lines company (WEL Networks, 2010).At its full capacity, the Te Uku – wind farm project is estimated to have a potential of generating up to 65MW of electricity which is currently enough to power more than 30, 000 local New Zealand homes. This is critically important not only to the local populations but also to the government of New Zealand (NZWEA, 2010). For example, apart from the local benefits, the…

  • Dirt Bikes Management

    Dirt Bikes Management a) What are the company’s goals and culture? The company’s goal includes the production of quality bikes with quality components. The company aims at trading these bikes across the world. In other words, the company does not restrict the sales of its products only to the manufacturing country, but globally. The culture of the company is to create conducive working environment for its employees. hence, it has since advocated for friendly family atmosphere and encouraging teamwork with the aim of obtaining quality information towards quality productions and management. Nonetheless, the known company’s models include the Enduro 250, the Enduro 550, the Moto 300 and the Moto 450.…

  • Civil Engineering Construction

    Full cost of the project will be financed by these two departments and Network Rail, BAA and City of London will also contribute. Transport for London is drawing funding from the European Investment Bank. In 2009 the enabling work phase of the project started, demolition work took place demolishing buildings including Astoria Theatre, Royal Oak Portal Taxi Facility Demolition, Demolition works for Crossrail Bond Street Station, Demolition works for Crossrail Tottenham Court Road Station and Pudding Mill Lane Portal. The enabling work contracts were awarded to different civil engineering companies. Tunneling provides solutions to the increased urbanization, congestion and pollution in the present age but tunneling is not such an…

  • Higher Education Task Force Report

    The essay needs to dwell mainly on the role of CBI Higher Education Task Force in reporting on the topic of ‘Stronger together: Government policy on this crucial issue is another aspect, which can determine the guidelines to be formulated. The proposed essay structure needs to present an analysis of the view points of different industry heads on the possibilities of investing funds by them and the government to speed up the process of economic growth. The role of media needs to be pinpointed to know the impact of the campaign on higher education policy. Contribution of media in initiating a national debate through various broadcasting channels would add value…

  • Stem Education

    8 2000 STEM education is a very different from education that deals with a different approach to learning and teaching so as to integrate the overall content of technology, mathematics, science, and engineering. The practice standards of this specific type of education are aligned towards a behavioral combination that needs to be present to the students who are undergoing such form of learning. The behaviors that are essential to a learning approach comprises of logical reasoning, investigation, inquiry, and collaboration (Hill, Bloom, Black &amp. Lipsey, 2008).The major aim of such education is that the students should be proficient enough to answer various complex questions that are related to science, mathematics,…

  • Failure of the London Ambulance System

    IT projects must be constantly tested at each stage and have a systematic transition. There has to be a balance between formal procedures and social attitude to minimize risk. Innovatively and positively integrated team with shared values can make a major contribution to the success of the project. IT projects in any organization support the operation, management, analysis and decision making function within an organization but research has also shown that many IT projects have to be abandoned. Amongst the high profile, IT project failures feature the London Ambulance System (LAS). One factor consistent with all IT projects is the fact that only 30% of the organizations applied risk analysis…

  • Corporate Accounting

    In this paper we look at impairment of assets from the view point of Transfield Services. The report starts with an introduction about Transfield Services and the business they are in. then it goes on to analyze the impairments done in 2009 wand 2007 and provides a brief explanation of the differences in the same. A detail analysis about the impairments done in the year ending 2009 has alson been provided alongwith the reasons for the sudden increase in the amount of impairment loss, a comment on the methods of impairment followed by Transfield Services and its sync with the AASB 136 standards. The report ends with a view on…

  • Construction op analysis (reading articles) R4

    Lecturer: CONSTRUCTION OP. ANALYSIS (READING ARTICLES) R4 Simulation of complex construction processes Question: What entails the simulation model of the construction process in the case study?Answer: Design of the bridge where the performance of the vehicles using the road is modeled (Charnes, 1321 – 1328). Then the last step is verification where animation is incorporated in the modeling.(2) Project scheduling using state-based probalistic networks.Question: In simulation where the STROBOSCOPE is applied, what was the output and what is its significance?Answer: The STROBOSCOPE gave the earliest time the project can be started and completed (Medeiros, 1287 – 1295). This implies that it is easy to establish the best time to create…

  • Effectiveness of Cognitivism Pedagogy

    Pedagogies relates to teaching methods that are applied by among various levels of education so that they can develop an understanding of the entire concept of their study. One of the pedagogy that will support the development of critical thinking in undergraduate students is cognitivism which is based on Piaget foundation. The learning approach lays emphasis on the human cognition which enables students to establish hypothesis as well as develop their intellect. It involves how students perceive ideas and acquiring knowledge owing to the fact that this learning approach is keen on responding to questions such as how we think, remember and solve problems. It further focuses on how other…

  • MBA Strategic Managment

    Introduction After reading John R. Harbison and Peter Pekar’s article “A Practical Guide to Alliances: Leapfrogging the Learning Curve” I have been thinking about successful corporate alliances. and how companies could use this ‘middle-ground’ approach, to focus on their capabilities, retain their competitive edge, and enhance ROI. According to the authors, corporate alliances help to leverage differential capabilities of partners to access incremental opportunities, and improve ROI. Based on a survey of 700 companies, the authors claim that companies which succeed in alliances significantly improved their ROI. The authors also claim that as company gains more experience in forging alliances, their success-rate improves, thereby, favorably impacting profitability. For the most…

  • Design and Construction of the Golden Gate Bridge

    Many experts believed the 6,700&nbsp.ft (2,042&nbsp.m) strait could not be bridged. Swirling tides and currents, with icy water 500&nbsp.ft (150&nbsp.m) in depth at the center and ferocious winds and blinding fogs were seen as insurmountable obstacles for construction or operation of the bridge. In addition, the design elements were changed several times as engineers tried to find the best solution to bridge the gap from Marin County to San Francisco. Even now, retrofitting is ongoing, as it has been discovered that the bridge is not impervious to earthquakes. (Nolte 2007) It is, in fact, a very lucky set of circumstances that this bridge has shown none of the flaws of…

  • The Art of Project Management

    The management of people in the management of workers. Management of people guides us about the roles and duties that a worker can perform in a project for making a project successful. It also guides management about what type of staff should reserve for a specific project (Kerzner, 2003). In this paper, I will present generic skills of project planning those can be applied successfully to any project irrespective of the size, aims or context of a project. The project planning is an important and basic step towards project achievement. It provides a roadmap to management for performing the tasks. It also helps with making decisions swiftly. Planning gives us…

  • Employee Empowerment in the Workplace

    Empowerment is seen as a process that results in individual employee enjoying autonomy while performing their jobs. This also ensures accountability on their part and thus develops a sense of ownership and increases the sense of fulfillment, while achieving shared organizational goals. Employee Empowerment has grown in importance in public administration. Early concern for employees as human resources and for the social aspects of work grew into the Quality of Work Life movement and such other efforts (e.g., McGregor 1960. Peters and Pierre 2000). The new public administration and the reinventing government movements have emphasized empowering employees (Marini 1971. Osborne and Gaebler 1992. DeWitt et al. 1994). Empowerment has become…

  • Journal and summary

    This aspect also helped me understand that, as an engineer, I need a mindset that applies fundamentals to produce solutions.Summary: This course aspect has the objective of outlining the steps and requirements involved in the engineering process, such as: (a) systems thinking, which identifies problem elements through attention to their components and boundaries, and an understanding of cross-boundary interactions, (b) reporting, which involves (courtesy of a final report, recommendation of requirements to customers, (c) writing skills, i.e. ability to write clearly and concisely, (d) reflective practice, i.e. journal-keeping while learning in stages through the project.Journal: Through this course, I want to be able to solve engineering problems such that the…

  • “Research &amp

    Analysis Study of Balfour Beatty plc Business and Competitive Environment"The company made good progress in the building sector in 2006. Heery, a leading architectural, engineering and programme management business, represents Balfour Beatty’s business interests in USA.Balfour Beatty’s Civil and Specialist Engineering and Services division, with revenues of 1,920m and 10,455 employees, specializes in engineering, design and management services provider in civil, transport, energy and water sectors in UK, USA, Hong Kong and Middle East. It has a leading market presence in specialised engineering services like overhead transmission lines, gas and water utility contracting and in road management and maintenance resulting in profit from operations tripled to 49m in 2005. The…